1. Install N EW O-ring seals onto the oil level indicator tube.
2. Lightly lubricate the O-ring seals with engine oil.
3. Install the oil level indicator tube.
NOTE: Refer to Fastener Notice .
4. Install the oil level indicator tube bolt at the indicator tube bracket.
Tighten: Tighten the bolt to 21 N.m (15 lb fit).
5. Install the starter motor. Refer to Starter Motor Replacement (6 .6 L ) .
6 . Install the exhaust manifold. Refer to Exhaust Manifold Replacement – Right Side (6.6L) .
7. Install the oil level indicator.
