5.7 Hemi – ENGINE BLOCK – CLEANING

Thoroughly clean the oil pan and engine block gasket surfaces.
Use compressed air to clean out:
• The galley at the oil filter adaptor hole.
• The front and rear oil galley holes.
• The feed holes for the crankshaft main bearings.
Once the block has been completely cleaned, apply Loctite PST pipe sealant with Teflon 592 to the threads of the
front and rear oil galley plugs. Tighten the 1/4 inch NPT plugs to 20 N·m (177 in. Ibs.) torque. Tighten the 3/8 inch
NPT plugs to 27 N·m (240 in. Ibs.) torque.

 

26. July 2021 by samuel
Categories: 5.7 Hemi | Comments Off on 5.7 Hemi – ENGINE BLOCK – CLEANING