For Front Mount, install the front mount bracket and cap screws.
For Side Mount, install the side mount brackets and cap screws.
Non Cummins® Engine Mounting Bolts
NOTE: Make sure to install any shims or spacers in the same location as removed.
Install the front engine mount fasteners and tighten. Refer to OEM specifications.
If previously loosened, tighten the rear engine mounting fasteners. Refer to OEM specifications.
Remove the lifting fixture or hoist from the front of the engine.
Cummins® Engine Mounting Bolts
NOTE: Make sure to install any shims or spacers in the same location as removed.
Install the front engine mounting bolt.
Install the hexagonal jam nut and tighten.
Torque Value: 350 N•m [ 258 ft-lb ]
After tightening the engine mounting bolt, inspect for signs of contact between the side brackets and the front engine
support bracket. Contact between the engine mount and side brackets can cause vibration complaints. If contact is
found, verify that all spacers and shims previously removed have been installed.
If previously loosened, tighten the rear engine mount fasteners. Refer to OEM specifications.
Remove the lifting fixture or hoist from the front of the engine.
