7.3L Power Stroke - OVERHAUL - CYLINDER HEAD - Valve Stem Oil Seals

Valve stem seals are used on intake and exhaust valves. No special installation procedure is
required for valve stem oil seals.

7.3L Power Stroke - VALVE LIFTER - Removal
1. Remove appropriate cylinder head. See CYLINDER HEADS. 2. Remove retaining bolt and camshaft follower…
7.3L Power Stroke - VALVE LIFTER - Installation
1. If assembling valve lifter, coat all components with engine oil and reassemble. To install,…
7.3L Power Stroke - VALVE LIFTER - Inspection
1. Ensure roller rotates smoothly and without excessive play. Inspect all components for damage. Ensure…
7.3L Power Stroke - BACK PRESSURE VALVE - Installation
1. To install, reverse removal procedure. Using the Spring Gauge (211-034, T74P-3504-Y), adjust the actuator…
7.3L Power Stroke - BACK PRESSURE VALVE - Removal
1. Open the hood. Remove the air charge cooler inlet and outlet ducts from the…

7.3L Power Stroke – OVERHAUL – CYLINDER HEAD – Valve Stem Oil Seals