Select the proper size ring dowel remover and insert the threaded end into the ring dowel to be removed.
Tighten the hexagon nut until snug. Mount the slide hammer onto the dowel remover.
Use the slide hammer to remove the ring dowel.
To remove a 1/4-inch straight dowel, place the 6.35 mm [1/4-inch] dowel remover on the dowel to be removed. It
may be necessary to turn the dowel remover to clear unmachined casting.
Tighten the hexagon nut to grip the dowel.
Mount the slide hammer on the 1/4-inch dowel remover and pull the dowel.
