Author: samuel
The engine cooling system is similar to that used in a gasoline engine, except that it is larger capacity. (See Figure 2-43). The purpose of…
The vacuum pump (Figure 2-37) is required because the diesel engine does not develop vacuum in the unrestricted air intake manifold. Since the air crossover…
1. Surface must be clean and dry. Remove all traces of oil and old gasket material. Clean with a chlorinated solvent such as carburetor spray…
During late 1983 Model Year production, a vented oil fill tube (14071059) replaced the non-vented tube (Figure 2-35). The vented tube will prevent the possibility…
When radiator oil coolers are suspected of leaking, they should be thoroughly checked before the radiator is removed for repair. This can be done by…
See Figure 2-33. The lubrication system of the 6.2L diesel engine is composed of: • Oil pan reservoir • Filter • Pump • Galleries Seven…
The 6.2L diesel has 2 exhaust manifolds made of nodular cast iron, Figure 2-32. Exhaust gases are forced out when a lobe on the camshaft…
See Figure 2-31. The 6.2L diesel engine front cover is a die cast of aluminum. This compares with the metal stamped front covers of most…
The 6.2L diesel engine has 2 flywheels, one to be used for automatic transmissions and one for manual transmissions. The automatic flywheel is made of…