• The fuel injector is controlled by an extremely precise piezo electric actuator that can accomplish multiple                 …

• The glow plug is used to heat the air in the cylinder. • The glow plug utilizes a system of sending voltage through a…

• The GPCM is a unit that controls the glow plugs in order to warm the air in the cylinders. • The GPCM uses a…

• The glow plug system is used to warm the air in the cylinders to enhance cold weather startability and reduce start       up…

• The ECM, which is mounted behind the engine on the passenger side cowl, uses sensor inputs to control actuators       and send fueling…

• The throttle body is operated by a stepper motor controlled by the ECM and assists with the exhaust             …

• The turbocharger actuator is an electronic motor that controls the position of the vanes inside of the high pressure turbocharger’s turbine housing. • The…

• The EGR valve is used to mix cooled exhaust gases with intake air to lower emissions and noise. • The EGR valve is stepper…

• The VCV regulates the delivery of fuel from the internal transfer pump (ITP) to the high pressure pumping             …

• The PCV governs the fuel pressure that is delivered to the fuel injectors via the high pressure fuel rails and fuel       …