1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement. 2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct…

1. Install the valve rocker arm cover gasket. 2. Install the upper valve rocker arm cover. 3. Install the upper valve rocker arm cover bolts.…

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement. 2. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill)…

1. Install N EW O-ring seals onto the oil level indicator tube. 2. Lightly lubricate the O-ring seals with engine oil. 3. Install the oil…

1. Remove the oil level indicator. 2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement – Right Side (6.6L). 3. Remove the starter motor.…

3. Install the lower oil fill tube bolt (1). Tighten: Tighten the bolts to 21 N.m (15 lb fit). 6 . Install the upper oil…

1. Remove the fan and clutch assembly. Refer to Cooling Fan and Shroud Replacement (Non-HP2) . 2. Remove the drive belt. Refer to Drive Belt…

1. Apply a 2-3 mm (1/8 in) wide, by 0.5-1.5 mm (1/16 in) high bead o f sealant to the intake manifold. Refer to   …

1. Remove the center intake manifold. Refer to Center Intake Manifold Replacement. 2. Remove the right fuel rail. Refer to Fuel Rail Fuel Feed Pipe…

1. Apply a 2-3 mm (1/8 in) wide, by 0.5-1.5 mm (1/16 in) high bead o f sealant to the intake manifold. Refer to   …