1. Install the turbocharger oil supply line to the engine block. NOTE: Refer to Fastener Notice. IMPORTANT: Lubricate the washers with diesel fuel before installing.…
Category: 2008 6.6L Duramax
1. Install the right fuel rail. NOTE: Refer to Fastener Notice. 2. Install the right fuel rail mounting bolts. Tighten: Tighten the right fuel rail…
1. Install a new O-ring onto the fuel injector. 2. Lubricate the O-ring with engine oil. 3. Install a new copper washer into the fuel…
1. Install the upper valve rocker arm cover. 2. Install the upper valve rocker arm cover bolts. Tighten: Tighten the upper valve rocker arm cover…
1. Install the upper valve rocker arm cover. 2. Install the upper valve rocker arm cover bolts. Tighten: Tighten the upper valve rocker arm cover…
1. Install the lower valve rocker arm cover. 2. Install the lower valve rocker arm cover bolts. Tighten: • Tighten the lower valve rocker arm…
1. Install the lower valve rocker arm cover. 2. Install the lower valve rocker arm cover bolts. Tighten: • Tighten the lower valve rocker arm…
1. Install the intake manifold crossover gaskets. 2. Install the intake manifold crossover. NOTE: Refer to Fastener Notice. 3. Install the intake manifold crossover nuts…
1. Apply a 2-3 mm wide by 0.5-1.5 mm high bead o f GM P/N 12378521 (Canadian P/N 88901148) sealant on the …
1. Apply a 2-3 mm wide by 0.5-1.5 mm high bead o f GM P/N 12378521 (Canadian P/N 88901148) sealant on the …