Warning: When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer’s recommendations for use. Wear goggles and protective clothing to avoid personal injury.…

The injector calibration specifications and parts information are provided in Injector Specifications, Bulletin No. 3379664. NOTE: CELECTTM injectors do not require flow calibration. The CPL…

The disassembly, inspection, repair, and calibration procedure for STC injectors are covered in Shop Manual PT (type D) Step Timing Control Injector, Bulletin No. 3810313.…

Visually inspect the injector plunger links for damage, excessive wear, and pitting or scoring on the ball ends. NOTE: If the plunger link is damaged…

Visually inspect the injector plunger links for damage, excessive wear, and pitting or scoring on the ball ends. NOTE: If the plunger link is damaged…

Use a clean, lint-free cloth to clean the exterior of the injectors. Use solvent to clean the injector plunger links. NOTE: CELECTTM injectors contain a…

Use a clean, lint-free cloth to clean the exterior of the injectors. Use solvent to clean the injector plunger links. NOTE: STC injectors contain a…

Remove and discard the three injector o-rings.