1. Place the disassembling stand under the transmission case. 2. Remove the bumper. 3. Remove the tie-rods with the tie-rod end lifter. In this case,…

1. Remove the support (3) mounting screw. 2. Remove the screw (2). 3. Remove the joint shaft (1). (When reassembling) • Lift the universal joint…

1. Disconnect the power steering delivery pipe joint bolt. 2. Install the power steering pump adaptor (refer to “SPECIAL TOOLS” (see page G-55)) instead of…

1. Turn the front wheels straight ahead. 2. Rotate the steering wheel lightly by hand, and measure the play (A). 3. If the play (A)…

Tightening torques of screws, bolts and nuts on the table below are especially specified.  

Let’s suppose that the hydraulic system gets in trouble due to a defective pump, damaged pipe or the like and that the steering resistance is…

The operating principle is the same as with the left turn. For the right turn, however, the gap between the input shaft (1) and sleeve…

When the steering wheel is turned left, the initial friction between the tires and the road surface keeps the ball nut (4) and sector shaft…