1. Insert the clutch center tool. 2. Remove the clutch assembly together with the clutch center tool. (When reassembling) • Direct the shorter end of…

1. Check the engine and clutch housing case are securely mounted on the disassembling stands. 2. Remove the engine mounting screws, and separate the clutch…

1. Remove the screw (4) then tap out the spring pin (3). 2. Slide the propeller shaft cover 1 (5) to the front and the…

1. Disconnect the HST delivery pipe (1) from power steering controller. 2. Remove the step bracket assembly (2). 3. Remove the clamp (3) and the…

1. Disconnect the suction hose (1). 2. Remove the delivery pipe (2). (When reassembling) • When reassembling the delivery pipe, install the new copper washers…

1. Remove the grip (1). 2. Remove the position control lever grip and position control lever guide (2). 3. Remove the floor sheet cover (3).…

1. Disconnect the reserve tank hose and remove the reserve tank (1). 2. Remove the battery (2) and the screws (3) from the battery support…

1. Remove the screw from support (1) and the steering joint shaft (2). 2. Remove the accelerator rod (3). (When reassembling) • Lift the universal…

1. Disconnect the wiring (1). 2. Disconnect the 4P connector (3), the starter relay (2), the engine stop solenoid relay (5) and the flasher unit…

1. Disconnect the wiring (1). 2. Disconnect the wirings (2). 3. Disconnect the 1P connector (3), (7) and the wirings (5), (6). 4. Remove the…