1 BPP switch 2 Stoplamp switch The signal from the stoplamp switch affects fuel metering when the brake is actuated and when a gear is…
A position sensor is integrated in the EGR valve, which records the instantaneous position of the valve and reports it back to the PCM. A…
The engine management system continually compares the fuel pressure request (calculated by the system) and the actual fuel pressure in the fuel rail (measured by…
The fuel pressure sensor measures the current fuel pressure in the fuel rail very accurately and quickly and delivers a voltage signal to the IDM…
The fuel temperature sensor is located in the fuel supply system on the rear of the high-pressure pump. It measures the fuel temperature in the…
1 Fuel injector 2 IDM or PCM 3 KS 4 Pilot injection and main injection The KS sensor registers increased vibrations arising as a result…
Location Integrated into the accelerator pedal Function The PCM needs the accelerator pedal position in order to control engine power according to driver input. The…
NOTE: The VSS is no longer installed on newer vehicles with manual transmission. On these vehicles the vehicle speed is provided via the ABS (Anti-lock…
The MAF sensor works according to the hot wire principle. The MAF sensor is used exclusively to regulate exhaust gas recirculation EGR (closed control loop)…
Example of installation position of the CHT sensor on the 2.0L Duratorq-DI 1 Cylinder head 2 Sensor tip 3 CHT sensor The CHT sensor (CHT…