Cummins 4BT – Fan Hub – Installation - Diesel Engines Troubleshooting

10 mm
Install the fan hub.
Torque Value: 24 N«m [18 ft-lb]

10 mm or 13 mm
Install the fan hub pulley.

Cummins 4BT - Fan Hub - Replacement
Preparatory Steps: • Remove the drive belt. • Remove the fan pulley. 10 mm Remove…
Cummins N14 - Fan Hub and Fan Hub Support Bracket - Installation
Install the following pieces on the engine and tighten the capscrews. Torque Values: • Fan…
Cummins 4BT - Thermostat - Installation
Position the thermostat as shown in the illustration. “ Package” the lifting bracket and thermostat…
Cummins 4BT - Fan Pulley - Replacement
Preparatory Step: • Remove the drive belt. 13 mm Remove the four capscrews, fan and…
Cummins 4BT - Push Rod - Installation
Install the push rods into the sockets of the valve tappets. Lubricate the push rod…

Published by samuel