Cummins 4BT – Gear Cover – Replacement – Removal

Related Posts

• Cummins N14 - Gear Cover - Removal

  Remove one capscrew on each side of the gear cover, and install a 7/16 -…

• Cummins 4BT - Gear Cover - Installation

  Lubricate the front gear train with clean engine oil. Caution: The seal lip and the…

• Cummins 4BT - Turbocharger - Replacement - Removal

  Remove the exhaust and intake air piping. 16 m m and 19 m m Remove…

• Cummins 4BT - Connecting Rods - Replacement - Removal

  Drain the coolant. Remove the cylinder head. Refer to Procedure (7-07). Drain the lubricating oil.…

• Cummins 4BT - Front Seal - Replacement - Removal

  Remove the drive belt. NOTE: Removal is easier if the crankshaft pulley is loosened before…