6.7L Cummins Engine Disassembly – Push Rods or Tubes

Mark the push rods to identify their location.
NOTE: The push rods must be installed in their original location and position.
Remove the push rods.

6.7L Cummins Engine Disassembly - EGR Connection Tubes
Remove the capscrews from the support flange of the EGA connection tube. NOTE: Use caution…
6.7L Cummins Engine Disassembly - Flexplate
Remove the flexplate capscrews and flexplate. NOTE: Some flexplates require mounting plates and/or adapters. It…
6.7L Cummins Engine Disassembly - Alternator
Spool Mount Remove the upper alternator link capscrew. Remove the mounting capscrew and nut at…
6.7L Cummins Engine Disassembly - Accessory Drive
Remove the two capscrews securing the accessory drive to the rear gear housing. Remove the…
6.7L Cummins Engine Disassembly - Flywheel
NOTE: Use the barring tool, Part Number 3824591, to hold the flywheel to prevent rotation.…

Published by samuel