Install
Rear Engine Mounted Crankcase Breather
NOTE: If the gasket has been removed from the rocker lever cover, a new gasket must be used.
If replacing the rocker lever gasket, the following installation procedure must be used when installing the press-in gasket.
• Press the molded gasket into the corners of the rocker lever cover
• Press the remaining gasket into the rocker lever cover.
Install the rocker lever cover.
Install the rocker lever cover isolators and mounting fasteners.
Tighten the mounting fasteners, starting with the center fasteners.
Torque Value: 24 N•m [ 212 in-lb ]
