5.7 Hemi – HOUSING-AIR CLEANER – REMOVAL

Related Posts

• 5.7 Hemi - ELEMENT-AIR CLEANER - REMOVAL

  1. Loosen clamp (1) and disconnect air duct {2} at air cleaner cover (3). 2.…

• 5.7 Hemi - ELEMENT-AIR CLEANER - INSTALLATION

  1. Install filter element into housing. 2. Position housing cover (3) into housing locating tabs.…

• Cummins N14 - Air Compressor - Removal

  Disconnect the air supply line from the air compressor to the intake manifold. Remove the…

• Cummins N14 - Thermostat Housing - Removal

  Disconnect the air compressor coolant return line from the thermostat housing. Remove the four capscrews…

• Cummins N14 - Flywheel Housing - Removal

  Remove capscrews (1) and (2), and install two 5/8 - 18 X 4-inch guide studs.…