KUBOTA – L2501 – TRANSMISSION – SERVICING – Clearance between Differential Case Bore (Differential Case Cover Bore) and Differential Side Gear Boss

Related Posts

• KUBOTA - L2501 - ENGINE - Oil Clearance between Tappet and Tappet Guide Bore

  1. Measure the tappet O.D. with an outside micrometer. 2. Measure the I.D. of the…

• KUBOTA - L2501 - ENGINE - Clearance between Rotor and Cover

  1. Put a strip of plastigauge on the rotor face with grease. 2. Install the…

• KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Differential Pinion and Differential Side Gear

  Differential Pinion and Differential Side Gear 1. Draw out the differential pinion shaft (2). 2.…

• KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Differential Pinion Shaft and Differential Pinion

  1. Draw out the differential pinion shaft 2 (5), and take out the differential pinion…

• KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Differential Lock

  1. Remove the clevis pin (1). 2. Draw out the differential lock fork shaft (2).…