Caution: Put a wooden block under the camshaft to avoid damage as the camshaft drops free from the cam gear.
Install the camshaft and gear assembly in a hydraulic press. Put v-blocks under the gear. Make sure the v-blocks
support the hub area of the gear.
Caution: Do not use a heating torch to remove the gear.
If you use a heating torch, a new gear must be installed.
Push the shaft from the gear.
NOTE: If the camshaft key is marked with an arrow, record the direction the arrow on the key is pointed (toward or away from the camshaft) for future reference.
Use a flat chisel and a hammer to remove the camshaft key.
Record the size (amount of offset) and the part number of the key.
