14 mm, 20 mm
Remove the fuel line from the piston style fuel transfer pump.
12 mm
Remove the fuel drain manifold line at the filter head.
17 mm
Remove the fuel line from the filter head.
17 mm, 12 mm, 14 mm, 20 mm
When replacing fuel lines, replace banjo sealing washers (1) each tim e they are removed.
Install the fuel line in the reverse order of removal.
10 mm, 17 mm
Bleed the fuel line by opening the banjo bleed screw.
10 mm, 17 mm
Operate the priming button on the fuel transfer pump until the fuel flowing from the fitting is free of air.
Tighten the bleed screw.
