• With the pressure cap removed and the coolant temperature at 90°C, let the engine idle in order to bleed air completely out of the…

• Using the radiator for extended periods of time without cleaning can increase chance of rust and scale formation, which may cause engine overheating. The…

• Visually check the belts for possible cracks and damage. • If any faults are found, replace the belts.  

[Inspection] • Press each belt at a central portion between pulleys with a force of approximately 98 N {10 kgf} as shown in the illustration…

• The water pump has a drain hole to prevent coolant from entering the unit bearing in case of defect in the unit seal.  

• The thermostat is a bottom bypass type that uses a wax-filled pellet as its flow-regulating element. When the wax is heated, it melts from…