Table of Contents Remove Remove TOC  WARNING  If fuel lines contain pressure, there may be sufficient pressure to penetrate the skin and can cause serious…

Table of Contents Remove Remove TOC Use a second wrench to hold the fitting while loosening the line fitting. Disconnect the turbocharger oil supply line…

Table of Contents Remove Remove TOC Remove the turbocharger oil drain line from the turbocharger and discard the gasket. Pull the turbocharger oil drain line…

Table of Contents Remove Remove TOC Remove the p-clip retaining the crossover tube. NOTE: When removing the EGR crossover tube and the capscrews, be sure not…

Table of Contents Remove Remove TOC NOTE: There are four potential dipstick tube locations. Threaded plugs are installed in locations not in use. NOTE: Some options include…

Table of Contents Remove Remove TOC Remove the capscrews that secure the ECM to the ECM cooling plate. SMALL | MEDIUM | LARGE Last Modified:  08-Jul-2010 Feedback / Help

Table of Contents Remove Remove TOC Replace the engine harness if there is an open or short circuit found under the protective covering of the…

Table of Contents Remove Remove TOC Remove the mounting capscrews and the fan hub assembly. SMALL | MEDIUM | LARGE Last Modified:  07-Jul-2010 Feedback / Help

Table of Contents General Information General Information TOC The ISX11.9 CM2250 engine uses only OEM supplied fan pulleys.  Cummins Inc. does not supply this part. …

Table of Contents Remove Remove TOC NOTE: This step is for the removal of the hot side alternator/refrigerant mounting bracket. Remove the two capscrews that mount…