Remove
|
TOC |
|
Remove the p-clip retaining the crossover tube.
NOTE: When removing the EGR crossover tube and the capscrews, be sure not to damage the exhaust gas pressure sensor.
Remove the two mounting capscrews from the EGR crossover tube ends.
Remove the EGR crossover tube.
Remove and discard the press-in-place seals from each end of the crossover tube.
Use protective caps from the Air Handling Clean Care Kit, Part Number 4919425, to cover the connection points.
|
|
|
|
|
|
Last Modified: 02-Jul-2010
;){kind=link}
;){kind=link}
