Some heaters will operate continuously when plugged into the correct voltage electrical socket. Operate them only when the ambient temperature is below 0°C [32°F].  

Route the drive belt on the engine using the belt diagram created in the Remove section. Do not install the belt over the water pump…

Inspect the drive belt for damage. Transverse (across the belt) cracks are acceptable. Longitudinal (direction of belt ribs) cracks that intersect with transverse cracks are…

The belt tensioner winds in the direction that the spring tang is bent over the tensioner body. To loosen the tension on the belt, rotate…

NOTE: This content in this section is generic and may not apply to all available cooling fan drive belt systems. The following section contains diagnostic…

Due to the number of drive belt arrangements, this procedure does not cover all available cooling fan drive belt routing. To make sure the cooling…

Use the labels applied in the remove step to align the lubricating oil lines. Install the lubricating oil filter lines to the filter head adapter…

Label the lubricating oil lines before removal. The labels will help ensure a correct installation. Disconnect the lubricating oil lines from the lubricating oil filter…

The following procedure is for engines with a remote- mounted oil filter option. The mounting location of the oil filter will vary by application. Refer…

Lubricating Oil Pressure When the diagnosing lubricating system malfunctions, check all obvious items related to oil pressure, such as gauges, high and low oil level,…