6.7L Cummins Cooling System – Coolant Heater – General Information

Some heaters will operate continuously when plugged into the correct voltage electrical socket. Operate them only
when the ambient temperature is below 0°C [32°F].

6.7L Cummins Engine Assembly - Coolant Heater
Install For flange mounted coolant heaters, lubricate the new heater a-ring with clean 15W-40 engine…
6.7L Cummins Cylinder Block - General Information
The cylinder block uses bored cylinders as opposed to liners. In the event of cylinder…
6.7L Cummins Engine Disassembly - Coolant Heater
For flange mounted coolant heaters, remove the two block heater retaining capscrews. Remove the coolant…
6.7L Cummins Fuel System - Fuel Pump - General Information
There are three different mounting locations available for high-pressure fuel pumps. The pump can be…
6.7L Cummins Lubricating Oil System - Lubricating Oil Lines - General Information
The following procedure is for engines with a remote- mounted oil filter option. The mounting…

Related Posts

Published by samuel