Install NOTE: Use the tension of the drive belt to hold the cooling fan in place when tightening the mounting capscrews. Do not hold the…

Install NOTE: Make sure to install the electric fan clutch mounting bracket in the same orientation and location as removed. The mounting bracket can be…

Install Install the fan hub and four capscrews. Torque Value: 24 N•m [ 212 in-lb ]    

Install If removed , install the belt tensioner mounting bracket and mounting bracket capscrews. NOTE: Some belt tensioner mounting brackets use internal fasteners for clearance.…

Install Rear Gear Train Install the idler pulley assembly and idler pulley support bracket mounting capscrews Tighten the capscrews. Torque Value: 18 N•m [ 159…

Install Spool Mount Install the alternator and the bottom alternator mounting capscrew and nut. Install the upper alternator link mounting capscrew at the top of…

Install Spool Mount: Install the upper alternator bracket and mounting capscrews. Tighten the upper and lower alternator bracket mounting capscrew. NOTE: On some applications, the…

Install For flange mounted coolant heaters, lubricate the new heater a-ring with clean 15W-40 engine oil. Install the coolant heater and retaining capscrews. Tighten the…

Install Install the new sealing ring into the pump groove. Install the water pump (with seal) and mounting capscrews. Torque Value: 30 N•m [ 22…

General Information NOTE: Due to the number of water inlet connection options, the following procedure has been commonized. The illustrations may not match the engine…