1 Turbocharger position sensor 2 Turbocharger vacuum unit 3 Variable geometry turbocharger On some versions with variable geometry turbochargers, a turbocharger position sensor is located…

Function The BARO sensor is located in the PCM and measures the ambient air pressure. The further functioning is similar to that for the Bosch…

Note: not all versions are equipped with an IAT sensor. For these versions the intake air temperature (downstream of the turbocharger) is calculated by the…

1 MAP sensor 2 IAT sensor NOTE: Not all versions are equipped with a MAP sensor. In these versions, the boost pressure is calculated from…

1 Battery junction box 2 Sheathed-type glow plug control module 3 Sheathed-type glow plug 1 4 Sheathed-type glow plug 2 5 Sheathed-type glow plug 3…

1.4L Duratorq-TDCi (DV) diesel/2.0L Duratorq-TDCi (DW) diesel 1 MAF sensor 2 MAP sensor (not on all versions) 3 Fuel pressure sensor 4 IAT sensor (not…

1 Fuel injector 2 Identification number Inside the hydraulic servo system there are various restrictions with extremely small diameters which have specific manufacturing tolerances. These…

A Fuel injector closed B Fuel injector open 1 Solenoid valve coil 2 Feed channel 3 Valve ball 4 Feed restriction 5 Feed channel to…

1 Connection, leak-off pipe 2 Retainer 3 Plastic ring 4 Seal ring 5 Combustion chamber seal 6 High pressure fuel line connection 7 Electrical connection…

NOTE: The bending radii are exactly matched to the system and must not be changed. NOTE: After disconnecting one or more high pressure fuel lines,…