Removal Loosen the four capscrews which secure the fan hub to the bracket. Turn the adjusting screw counterclockwise to release tension, and remove the belts.…

Remove the seal from the rear cover.

Remove the capscrews from the rear cover, and remove the cover from the crankshaft flange.

Remove capscrews (1) and (2), and install two 5/8 – 18 X 4-inch guide studs. Warning: Because this part weighs more than 23 kg [50…

Install two 1/2 – 13 X 1 1/2 puller capscrews which have a minimum of 1 1/4-inch threaded area at points (1) and (2). Remove…

NOTE: Use engine rebuild stand, Part No. 3375194, and the adapter plate, Part No. 3375013. Use six 5/8-11 X 1 3/4-inch grade 5 capscrews to…

Remove the six capscrews from each of the two water header covers. Remove the covers, and discard the gaskets.

Remove the piston cooling nozzles. Locking pliers clamped to the piston cooling nozzle flange may be needed to prevent nozzle damage during removal. Remove and…

Remove the four capscrews and the housing.

Loosen four mounting capscrews, and remove the cool- ant inlet transfer connection from the water pump.