Remove the capscrew which holds the oil cooler support bracket to the cylinder block at the rear of the oil cooler. Remove one of the…

Remove the three alternator mounting bracket capscrews and the mounting bracket.

Remove the adjusting link capscrew and the adjusting link. Remove the alternator to alternator support bracket, nut, washer, capscrew, and the alternator.

Loosen the alternator to alternator support nut and cap- screw. Loosen the adjusting link capscrew and tensioning bolt, if applicable. Push the alternator toward the…

Caution: A fan hub spacer can be behind the fan. It will drop as the fan is removed. Make sure to remove the fan and…

Warning: Because this part weighs more than 23 kg [50 lbs], two people or a hoist will be required to lift the starting motor to…

NOTE: Two dowels are used in each cylinder head to align the exhaust manifold assembly. Remove two capscrews, and install two guide studs. Warning: Because…

Remove the oil supply and the oil drain tubes from the turbocharger. Remove the four turbocharger mounting nuts. Remove the turbocharger and discard the gasket.…

Loosen the hose clamp at the breather vent tube. Remove the tube support bracket capscrew and the bracket. Remove the tube and the hose from…

Use an oil filter wrench, Part No. 3375049, to remove the lubricating oil filter.