A = Intake valve B = Exhaust valve Rotate the engine in the normal direction of rotation until the No. 1 piston (flywheel side) approaches…

Insert the torque wrench in the suitable tool so that the A axis of the key fig. 39 is at 90° to the B axis…

Position belt preload tool 7107-1460-049 1 over the timing belt idler adjustment ear 2. See “Camshaft timing – Belt Tightening and Fastening”.

Important Remove the distributor toothed belt from its protective wrapping only when mounting it. Make the connections for toothed belt fig. 33 and that of…

1 Timing reference mark on cylinder head. 2 Camshaft pulley timing mark 3 Camshaft pulley timing mark, for KDW, 702, 1003, and 1404 engines.  

Unscrew screw 1 and remove the pulley. No extractor is needed. When refitting tighten the screw at a torque of 80 Nm. Note: Assess any…

Important When reassembling, make sure that the key remains inserted in its place. Note: Reference mark 1 on the crankshaft timing pulley and reference mark…

Components: 1 Nut 2 Washer 3 Pulley 4 Bearing 5 Shaft/Support 6 Mounting plate 7 Tensioning lever  

Caution – Warning When you remove the distributor belt replace it even if its prescribed operation time has not expired yet. Danger – Attention Always…

Components: 1 Camshaft pulley 2 Timing belt 3 Crankshaft pulley 4 Coolant pump pulley 5 Belt tensioner pulley