1. To slow charge the battery, connect the battery positive terminal to the charger positive terminal and the negative to the negative, then…
Category: KUBOTA
1. Check the battery condition by reading the indicator (2). IMPORTANT • The factory installed battery is of non-refillable type. If the indicator turns white,…
1. Turn the main switch on, and turn on the head light. 2. Measure the voltage across the battery’s positive terminal post and the cable…
1. Stop the engine and turn the main switch off. 2. Connect the COM (−) lead of the voltmeter to the battery’s negative terminal post…
Tightening torques of screws, bolts and nuts on the table below are especially specified.
The seat switch (2) is mounted on the seat rail (4) under the operator’s seat (1). It serves as a safety switch of OPC system.…
• PTO gear shift lever: “OFF” • HST pedal: “Neutral” • Seat: “When operator does not sit on the seat” As shown in the above…
• PTO gear shift lever: “OFF” • HST pedal: “Neutral” • Seat: “When operator does not sit on the seat” As shown in the above…