1. Disconnect the 2P connector (2) from PTO lever safety switch. 2. Connect the circuit tester to each safety switch’s terminals. 3. Push the switch.…
Category: KUBOTA
1. Remove the safety leads. 2. Connect the circuit tester to the safety switch leads. 3. Measure the resistance between leads. 4. If the safety…
1. Remove the safety leads. 2. Connect the circuit tester to the safety switch leads. 3. Measure the resistance between leads. 4. If the safety…
1. Turn and hold the main switch key at the PREHEAT position. 2. Measure the resistance with an ohmmeter across the B terminal and the…
1. Turn and hold the main switch key at the START position. 2. Measure the resistance with an ohmmeter across the B terminal and the…
1. Turn the main switch on. 2. Measure the resistance with an ohmmeter across the B terminal and the AC terminal. 3. If 0 ohm…
1. Turn the main switch off. 2. Measure the resistance with an ohmmeter across the B terminal and the AC terminal, B terminal and ST…
1. Measure the voltage with a voltmeter across the connector B terminal and chassis. 2. If the voltage differs from the battery voltage (11 to…
1. Remove the panel cover. 2. Disconnect the main switch connector (2). 3. Perform the following checking.
1. When storing the tractor for long periods of time, remove the battery from tractor, adjust the electrolyte to the …