2008 6.6L Duramax – DRIVE BELT TENSIONER REPLACEMENT – Removal Procedure

Related Posts

• 2008 6.6L Duramax - DRIVE BELT TENSIONER DIAGNOSIS

  1. Remove the drive belt. Refer to Drive Belt Replacement. 2. Position a 3/8-inch drive…

• 2008 6.6L Duramax - DRIVE BELT REPLACEMENT - Removal Procedure

  1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical)…

• 2008 6.6L Duramax - DRIVE BELT REPLACEMENT - Installation Procedure

  1. Install the drive belt, if equipped with dual generators. 2. Route the drive belt…

• 2008 6.6L Duramax - DRIVE BELT SYSTEM DESCRIPTION

  The drive belt system consists o f the following components: • The drive belt •…

• 2008 6.6L Duramax - Oil Cooler