Home » 2008 6.6L Duramax » 2008 6.6L Duramax – UPPER OIL PAN REMOVAL – Removal

2008 6.6L Duramax – UPPER OIL PAN REMOVAL – Removal

1. Remove the oil level indicator tube bracket bolt.

2. Remove the oil level indicator tube.

3. Remove the two oil pan to flywheel housing bolts.

4. Remove the 24 upper oil pan bolts using a long bit 6 mm hex driver.
5. Seperate the upper oil pan from the engine block using J 37228 . See Special Tools .
6. Remove the upper oil pan.