Cummins ISX11.9 CM2250 – Service Manual 001-089   Block Stiffener Plate

WARNING  To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin.

WARNING  Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations.

• Drain the lubricating oil. Refer to Procedure 007-037 in Section 7.
• Remove the lubricating oil pan. Refer to Procedure 007-025 in Section 7.
• Remove the lubricating oil suction tube. Refer to Procedure 007-035 in Section 7.

Inspect the block stiffener plate for cracks or other damage.

Remove the capscrews and the block stiffener plate.

Install the block stiffener plate and the capscrews.

Tighten the capscrews.

• Install the lubricating oil suction tube. Refer to Procedure 007-035 in Section 7.
• Install the lubricating oil pan. Refer to Procedure 007-025 in Section 7.
• Prime the lubricating oil system. Refer to Procedure 007-037 in Section 7.
• Fill the engine with lubricating oil. Refer to Procedure 007-037 in Section 7.
• Operate the engine to normal operating temperature and check for leaks.