Remove
|
TOC |
|
There are two identical cam follower assemblies, one for cylinders 1 through 3, and one for cylinders 4 through 6.
Four capscrews hold down each of the cam follower assemblies. Loosen the capscrews and pull each assembly out of the cylinder block.
There are dowel rings (1) located at the Number 1 and 4 capscrews of each assembly. These dowel rings are press-fit into the cylinder block. Make sure they stay in position after removing the cam follower assemblies.
|
|
|
|
|
|
Last Modified: 25-May-2010
;){kind=link}
;){kind=link}
