Home » ISX11.9 CM2250 - Service Manual » Cummins ISX11.9 CM2250 – Service Manual 007-025   Lubricating Oil Pan

Cummins ISX11.9 CM2250 – Service Manual 007-025   Lubricating Oil Pan

Table of Contents

Install

Install

TOC

Apply a 1.97 mm [1/8 in] bead of silicon sealant, Part Number 3164067, to each of the four T-joints:

  • Two locations at the intersection of the cylinder block and rear gear housing.
  • Two locations at the intersection of the cylinder block and front seal carrier.

SMALL | MEDIUM | LARGE


Install guide pins, Part Number 3164977, into the pan rail to help align the oil pan and gasket to the cylinder block during installation.

Install a new oil pan gasket.

Install the lubricating oil pan.

SMALL | MEDIUM | LARGE
   


 CAUTION 

Do not add lock washers to the factory installed capscrews. The movement of the lock washer against the oil pan can create a path for corrosion and/or stress cracks.

Install the oil pan capscrews.

Remove the guide pins, if used, and install the remaining capscrews.

Tighten the capscrews in a crisscross sequence, as illustrated.

Torque Value:  20  n.m  [177 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  23-Jun-2010