Home » ISX11.9 CM2250 - Service Manual » Cummins ISX11.9 CM2250 – Service Manual 013-020   Starting Motor

Cummins ISX11.9 CM2250 – Service Manual 013-020   Starting Motor

Table of Contents

Install

Install

TOC

 CAUTION 

Make sure to use the same thickness of starting motor spacer (if used) as the one removed to install the starting motor, to reduce the possibility of engine or starting motor damage.

Before installing the starting motor, make sure the capscrews are the correct size and grade.

Install the starting motor, spacer (if used), and the three mounting capscrews.

Tighten the capscrews.

Torque Value:

5/8-11 x 1.75 inch Capscrew  140  n.m  [103 ft-lb]
Torque Value:

5/8-11 x 2.00 inch Capscrew  201  n.m  [148 ft-lb]
Torque Value:

39 MT Starters (Aluminum Flywheel Housing)  129  n.m  [95 ft-lb]
Torque Value:

39 MT Starters (Cast Iron Flywheel Housing)  163  n.m  [120 ft-lb]
Torque Value:

Prestolite™ M105  Capscrew 183  n.m  [135 ft-lb]

SMALL | MEDIUM | LARGE


Install and tighten the electrical connections to the starting motor, including the ground strap (if used).

SMALL | MEDIUM | LARGE
Last Modified:  09-Jun-2010