1. Lightly lubricate the oil filter gasket with clean engine oil.
NOTE: Do not over tighten the oil filter.
2. Thread the oil filter (1) onto the oil cooler (2) oil filter boss.
3. When the oil filter gasket makes contact with the oil cooler sealing surface, hand tighten the oil filter one half turn, or 180°.
4. Position the belly pan to the under side of the vehicle and install the retainers (1).
5. Lower the vehicle.
6. Fill the crankcase with the specified type and amount of engine oil as described in STANDARD PROCEDURE.
7. Install the oil fill cap.
8. Start the engine and check for leaks.
9. Turn the engine off and check the oil level.
