1. Remove the cylinder head cover. Refer to COVER(S), CYLINDER HEAD, REMOVAL.
2. Install Push Rod Retainer (special tool #9070, Retainer, Push Rod) (1).
Courtesy of CHRYSLER GROUP, LLC
3. Using the sequence shown in illustration, loosen the rocker shaft assemblies.
CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an “I”.
4. Remove the rocker shaft assemblies. Note the location for reassembly.
CAUTION: The longer pushrods are for the exhaust side, and the shorter pushrods are for intake side.
5. Remove the pushrods. Note the pushrod location for reassembly.
