6.7L Power Stroke – Cylinder Head Lubrication

Related Posts

• 6.7L Power Stroke - Top of Cylinder Head

  The air inlet is located on the out-board side of the cylinder heads. The exhaust…

• Power Stroke 6.0L - Cylinder Head

  The 6.0L POWER STROKE uses a four (4) valve per cylinder head design to increase…

• 6.7L Power Stroke - Bottom Cylinder Heads

  Six bolts per cylinder seal the aluminum cylinder heads to the block. Each cylinder has…

• 6.7L Power Stroke - Pistons

  The pistons are oil cooled. A oil jet that bolts into the block sprays oil…

• 6.7L Power Stroke - Lubrication System Oil Flow

  • Oil is drawn from the oil pan through the pickup tube. The oil is…