6.7L Cummins Mounting Adaptations – Flex plate – Inspect for Reuse

Inspect the teeth of the ring gear for chips or uneven wear.
Check the flex plate for cracks or other damage.
Replace the flex plate if any damage is found.

6.7L Cummins Mounting Adaptations - Flex plate - Remove
Remove the flex plate cap screws and flex plate. NOTE: Some flex plates require mounting…
6.7L Cummins Engine Disassembly - ECM Mounting Plate
Remove the three capscrews holding the ECM mounting plate to the cylinder block. NOTE: Do…
6.7L Cummins Cylinder Block - ECM Mounting Plate - Clean and Inspect for Reuse
For an aluminum ECM mounting plate, clear debris from cooling fins and yoke for maximum…
6.7L Cummins Cylinder Block - ECM Mounting Plate - Disassemble
For an aluminum ECM mounting plate, remove the three capscrews holding the ECM mounting plate…
6.7L Cummins Cylinder Block - ECM Mounting Plate - Assemble
For an aluminum ECM mounting plate, install the aluminum ECM mounting plate onto the steel…

Related Posts

Published by samuel