Use the brass drift pin to drive the ring gear from the flywheel.
Related Posts
- 6.7L Cummins Mounting Adaptations - Flywheel - Assemble
If removed, install a new pilot bearing. Use a mandrel and hammer to install the…
- 6.7L Cummins Mounting Adaptations - Flywheel - Assemble
If removed, install a new pilot bearing. Use a mandrel and hammer to install the…
- 6.7L Cummins Mounting Adaptations - Flywheel - Remove
NOTE: Use the barring tool, Part Number 3824591, to hold the flywheel to prevent rotation.…
- Cummins N14 - Flywheel Ring Gear - Replacement
Heat the outside diameter of the ring gear with a heating torch. Use a blunt…
- 6.7L Cummins Mounting Adaptations - Flywheel - Install
Install two M12 x 1.25 x 90-mm guide pins into the crankshaft flange 180 degrees…
