Posted on
Home » KUBOTA » L2501 » KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – LIGHT SWITCHES AND FLASHER UNIT – Turn Signal Switch Continuity when Setting Switch to Left Turn Position

KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – LIGHT SWITCHES AND FLASHER UNIT – Turn Signal Switch Continuity when Setting Switch to Left Turn Position

1. Disconnect the 8P connector (A) from the combination switch.
2. Set the turn signal switch to Left Turn position.
3. Measure the resistance with an ohmmeter across the B2 terminal to the L terminal.
4. If 0 ohm is not indicated, replace the combination switch.

 

Related Posts

Avatar photo

Published by samuel