Use camshaft bushing driver set, Part No. 3376637, and driver, Part No. 3375861, to remove bushings No. 1
through No. 7.
Remove the No. 1 bushing first and then the remaining six (6) bushings in order from front to rear.
To remove bushings No. 1 through No. 7, insert the tool assembly through the camshaft bore until the driver is
against the bushing.
Hit the slide hammer against the shaft assembly until the bushing is driven from the bore.
To remove the No. 7 bushing during in-chassis camshaft bushing removal, insert the tool assembly through the
bore until the pins of the puller assembly are engaged behind the bushing.
