Cummins ISX11.9 CM2250 – Service Manual 016-003   Engine Support Bracket, Rear

WARNING  This component or assembly weighs greater than 23 kg [50 lb]. To prevent serious personal injury, be sure to have assistance or use appropriate lifting equipment to lift this component or assembly.

Use a hoist or lifting fixture to support the rear of the engine.

Remove the capscrew(s) from the rear engine mount.

Remove the four capscrews from the rear support bracket.

WARNING  When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer’s recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury.

WARNING  When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury.

WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause bodily injury.

Use steam or solvent to clean the front engine support bracket.

Dry with compressed air.

Inspect the support bracket for cracks or other damage. If the support bracket is cracked or damaged, it must be replaced.

Install the support bracket and mounting capscrews.

Tighten the capscrews. Refer to the OEM service manual.

Lower the rear of the engine.

Install the rear engine mount capscrew(s).

Tighten the capscrews. Refer to the OEM service manual.

Remove the lifting fixture or hoist from the rear of the engine.

NOTE: Make sure to install any shims or spacers in the same location as removed.