Install
|
TOC |
|
Install the front support engine support bracket and mounting capscrews.
NOTE: Make sure the capscrews are installed in the same locations they were removed from.okay
Tighten the top two capscrews.
Torque Value: 278 n.m [205 ft-lb]
Tighten the bottom four capscrews.
Torque Value: 278 n.m [205 ft-lb]
|
|
|
|
|
Lower the front of the engine.
Install the front engine mount capscrews.
Tighten the capscrews. Refer to the OEM service manual.
Remove the lifting fixture or hoist from the front of the engine.
|
|
|
|
|
Last Modified: 30-Jul-2010
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
