Installation procedure •Installation: Hose clip Install hose clips to the markings on the breather hose. Installation: Breather hose • Insert the breather hose so that…
Author: samuel
• Even when all coolant in the crankcase has been drained out, approximately 0.5 dm3 {0.5 L} of coolant remains in the EGR cooler. Before…
#201 Inspection of relay (normally open, 5 pins) • Perform a continuity check and an operation check. If there is any abnormality, replace the relay.…
6. Inspections Performed at Electronic Control Unit Connectors • These inspections aid troubleshooting by enabling you to check whether electronic control unit signals are being…
• It is possible to see service data and actuator tests simultaneously.
• It is possible to see service data and actuator tests simultaneously.
3.1 Diagnosis code list • Diagnosis codes shown by the Multi-Use Tester and those indicated by flashing of the warning lamp are different. • The…
• Before measuring voltage, check the battery for charged condition and specific gravity. If system inspection is performed with the battery uncharged or reduced in…