FUSO 4M4 – EMISSION CONTROL – BLOWBY GAS RETURN SYSTEM

Installation procedure

•Installation: Hose clip
Install hose clips to the markings on the breather hose.

Installation: Breather hose
• Insert the breather hose so that its white paint mark becomes vertical to paint mark on positive crankcase ventilation valve, then connect the hose firmly all the way into the valve.

• Insert the breather hose with its white paint mark opposed to the projection of the air hose, then connect the hose firmly all the way to the spool.

 

Leave a Reply

Your email address will not be published. Required fields are marked *